Siemens Gigaset 4015 - Manual (Page 43)

37
Press Keys:
Handset Operation
Manual Registration
You may also manually register additional handsets
to your base station.
NNNNNNNNNNNN
MENU Open the Menu.
NNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNN 
REGISTER HS

Scroll to Register Handsets and press OK.
PIN is displayed.
NNNNNNN 
Enter the 4-digit system PIN (default: 0000) and
press OK (see page 45 for Changing System PIN).
NNNNNNNNNNNNNNNNNNNNNNNNNNNN
REGISTER HS Entry will be flashing.
NNNNNNN 
Press OK at the flashing prompt.
Underside of the base station
Hold down the Page/Registration key on the under-
side of the base station for approximately 10 sec-
onds until a signal tone is heard from the base sta-
tion.
If all internal handset numbers are assigned, the in-
tercom number 3 is reassigned. The handset that
has been registered under number 3 will be dereg-
istered.
When it has been successfully registered, the
handset reverts to the idle state.
De-registering Handsets
NNNNNNN
INT Press the Intercom soft key.
NNNNNNN NNNNNNN   Scroll to the handset to be de-registered.
NNNNNNNNNNNN
MENU Open the Menu.
NNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNN 
DE-REGISTER

Scroll to De-register and press OK.
PIN is displayed.
NNNNNNN 
Enter the 4-digit system PIN (default: 0000) and
press OK.
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNN
DE-REGISTER?

Press OK at the prompt.