Samsung 2063UW - Manual (Page 56)

Note
If the sound from your monitor is too soft, adjust the volume after setting the volume of your PC
to the maximum.
3. Follow the steps described below. You should find that the microphone and speaker have been
set up.
Restrictions on Using the Monitor
1. The Camera and Audio functions of this monitor except the basic Display function are recognized
as USB Devices.
Note
This monitor must be connected with a D-Sub (Analog) or a DVI-D cable (Digital) when used as
a normal monitor. USB cables are used when connecting other devices.
2. For some media players, when a USB device is being recognized again while a media player is
running, you have to close and run it again to operate the sound and camera devices normally.
3. For some PCs, your PC may not boot up with the monitor recognized even if the USB cable is
connected, depending on the PC BIOS version. Check whether the BIOS on your PC has been
updated to the latest version.
4. Sometimes, if the initial volume setting is low the sound may be very low due to the characteristics
of USB Audio devices. (This may differ according to the operating system.) In this case, adjust
the Master Volume of the PC to an appropriate level.
Using the Software
55