Environmental specifications, Temperature, Humidity – SanDisk Cruzer Enterprise User Manual
Page 9: Altitude, Vibration (random), Shock, Crush, Drop test, Dust protection, Restricted materials content and rohs compliance
Cruzer Enterprise
Product Specifications
Revision
1.0
5.
Environmental Specifications
5.1
Temperature
Operating temperature: 0° C to 60° C
Storage temperature: -40° C to 70° C
5.2
Humidity
Relative humidity during operation (non-condensing): 5% to 90%
Relative humidity during storage: 5% to 95%
5.3
Altitude
Operating: Low Altitude Limit: -200 m; High Altitude Limit: 6,096 m (20,000 ft)
Non-operating: Low Altitude Limit: -200 m; High Altitude Limit: 12,192 m (40,000 ft)
5.4
Vibration (Random)
Operating: 5 G RMS, 10 to 2,000 Hz, 0.5 Oct/min sweep rate
Non-operating: 10 G RMS, 10 to 2,000 Hz, 0.5 Oct/min sweep rate
5.5
Shock
Operational Half-Sine Shock: The device withstands operational half-sine shock of 90 in/sec (179 g peak) 2
shocks in 3 directions duration 2ms.
Non-Operational Half-Sine Shock: The device withstands operational half-sine shock of 90 in/sec (179 g
peak) 2 shocks in 3 directions duration 2ms.
5.6
Crush
The device withstands 3.3kgf/cm
2
of sustained force on all three axes without any damage.
5.7
Drop Test
The device withstands 2 drops on concrete floor from 60 inches on each of 6 axes without any damage.
5.8
Dust Protection
The internal protection corresponds to level IP50 according to IEC 60529.
5.9
Restricted Materials Content and RoHS Compliance
Cruzer Enterprise complies with the Restriction of Hazardous Substances (RoHS) directive, as well as the
directive regarding lead-free products.
In addition, Cruzer Enterprise does not contain any material that is listed as restricted in the 2002/95/EC
directive issued by the European Parliament.
© 2007 SanDisk® Corporation
9
May, 2007 Document No. PSP-CRE-0507-11