Setting the system – Samsung YP-MT6 User Manual
Page 25
49
Setting the System
Setting the System
48
√
√
Resume
Press and hold the
"M"
button. Select Settings
→ System.
●
Use , to select Resume On or Off.
●
On: Play back will resume from the point it was
previously stopped.
●
Off: Play back will resume from the beginnng of the
file/track that was playing when stopped.
√
√
Default vol
●
Use , to set the default volume to a level between
0 and 30.
●
If the power is turned on again after having adjusted the
volume to a level above the default volume
(for example: 20) music is played at the default volume level.
●
If the power is turned on again after having adjusted the volume at or below the default
volume (for example: 20 or lower), the music is replayed at the previous volume.
√
√
Tuner Region
●
Use , to select FM Tuner Region.
●
Worldwide : Search FM frequency between 87.5MHz to
108.00MHz in increments of 50 KHz.
●
US : Search FM frequency between 87.5MHz to108.0MHz in
increments of 100 KHz.
●
Japan : Search FM frequency between 76.0MHz to 108.0MHz
in increments of 100 KHz.
√
√
Tuner Level
●
Use , to select FM Tuner Sensitivity.
●
The higher the FM Tuner Sensitivity,
the more frequency it can receive .
●
High
→
Middle
→
Low
√
√
Default Set
●
Use , to select Default Set Yes or No.
●
Yes : All settings selected will revert back to the player
default settings.
●
No : All settings selected will remain as they are.
√
√
Beep
●
Use , to select Beep On or Off.
●
On: Beep sounds whenever you press the button.
●
Off: No beep sounds when you press the button.
√
√
About
●
If you select About, you can check the software
version information, total number of tracks and
remaining capacity.
N
N
N
N
o
o
o
o
tt
tt
e
e
e
e
- Go to samsung.com for software updates.
✍