Samsung 174T - Manual (Page 11)

Unpacking
Front
Rear
1. Auto button Use this button to auto adjustment direct access.
2. Exit button
Source button Use this button to Exit the active menu or the OSD.
When push the 'Source' button, then Selects the Video signal while the OSD is
off. (When the Source button is pressed to change the input mode, a message
appears in the center of the screen displaying the current mode -- analog or
digital input signal.)
Note:If you select the Digital mode, you must connect your monitor to the graphic
card with a digital port using the DVI cable.
3. MagicBright button MagicBright is a new feature providing optimum viewing environment depending
on the contents of the image you are watching. Currently three different modes
are available: Text, Internet, and Entertain. Each mode has its own pre-
configured brightness value. You can easily select one of three settings by simply
pressing MagicBright control buttons.
4. Adjust buttons These buttons allow you to highlight and adjust items in the menu.
5. Menu button Use this button to open the OSD and activate a highlighted menu item.
6. Power button Use this button to turn the monitor on and off.
7. Power indicator This light glows green during normal operation, and blinks green once as the
monitor saves your adjustments.
Note: See
PowerSaver described in the manual for further information regarding power saving functions.
For energy conservation, turn your monitor OFF when it is not needed, or when leaving it unattended for
long periods.
SyncMaster 173T/193T/191T plus/153T/174T