Rear – Samsung 174T User Manual
Page 13
Unpacking
Front
Rear
(The configuration at the back of the monitor may vary from product to product.)
1. Power port
Connect the power cord for your monitor to the power port on the back
of the monitor.
2. AudioPower - Out (Option)
3. DVI port
Connect the DVI Cable to the DVI Port on the back of your Monitor.
4. Signal port
Connect the signal cable to the 15-pin, D-sub connector on the back of
your monitor.
5. Pin
Press the button on the bottom rear of the stand in order to lock down
the stand.
Note : Always have your monitor faced front side down on a level
surface (not resting on the stand) before locking it down. Pressing the
button while the monitor stand is resting on a flat surface may cause
your monitor to topple or fall and cause personal injury and/or damage
to the unit.
a. Power on/off Switch
Note:
See
Connecting Your Monitor
for further information regarding cable connections.
SyncMaster 173T/193T/191T plus/153T/174T