Skyworth SLTV-2063A - Manual (Page 13)

12
Function Menu Operation
Function Menu Operation
Press MENU button to display Picture menu. You can
browse Picture, V-Chip, Setup, Tune and PC Setup
menu by pressing VOL+/VOL- buttons. Press CH-
button to enter the selected menu and adjust
available settings by pressing VOL+/VOL- buttons
or confirm you selection or enter next menu by
pressing VOL+ button.
Picture menu
In Picture menu, you can press CH+/CH- buttons to
select available items and adjust brightness,
contrast, hue, color and sharpness by pressing
VOL+/VOL- buttons.
Note:
Hue is only available for NTSC system.
Both Hue and Sharpness settings are not
available for PC input.
V-Chip menu
You can set parameters on V-Chip
(parental control) in this menu. All settings are
effective for both ATV and DTV.
The default V-Chip Password is set as 1111.
Press CH- button to enter V-Chip menu if there is
no password or enter Password Check menu
After input password which consists of only
digitals and spaces, press VOL+ button to
confirm. If the password is correct, return to
V-Chip menu. Otherwise Check Password menu
keep displayed and allow you to re-enter the
password. Press MENU button to quit from this
menu forcedly.
Lock
Press VOL+ /VOL- buttons to select On which
switches on V-Chip function or Off which
switches off V-Chip function. If switch off V-Chip
function, video and audio will not be blocked.
Change Password
Press VOL+ button to enter Password Change
menu to re-set V-Chip password.
After enter new password which consists of only
digitals and spaces, press VOL+ to confirm.
Enter the new password again then press
VOL+ button to confirm again. If the same
password is entered twice, Successful will be
displayed to indicate that you have changed
the password successfully. If the passwords are
different, Unmatched is displayed to indicate
that new password is invalid and allow you to
re-enter the new password. Press MENU button
to return to V-Chip menu.
TV Rating
Press VOL+ button to enter TV Rating menu
In this menu you can set TV rating. Press
CH+/CH- and VOL+ /VOL- buttons to select
desired rating, block or unblock the selected
rating. B means block and V means view.
MENU
CH.-
VOL.+ VOL.-
CH.+