Troubleshooting, Self-diagnosis function, Troubleshooting self-diagnosis function – Sony MDS-JE770 User Manual

Page 44

Advertising
background image

masterpage:Left

(3 column)

filename[\\WIN-48\NAKAYAMA 3-1\4233926121 3.14\423392612MDSJE770U2\GB05OPE-
U2.fm]

44

model name1[MDS-JE770] model name 2 [MDS-JE470]

[4-233-926-12(1)]

If you experience any of the following
difficulties while using the deck, use this
troubleshooting guide to help you remedy the
problem. Should any problem persist, consult
your nearest Sony dealer.

The deck does not operate or operates poorly.

The MD may be dirty or damaged. Replace the MD.

The deck does not play.

• Moisture has formed inside the deck. Take the

MD out and leave the deck in a warm place for
several hours until the moisture evaporates.

• The deck is not on. Press ?/1 to turn on the deck.
• The deck may not be connected to the amplifier

correctly. Check the connection (page 8).

• The MD is inserted in the wrong direction. Slide

the MD into the disc slot with the label side up
and the arrow pointing toward the slot (page 20).

• The MD may not be recorded. Replace the disc

with one that has been recorded.

• You cannot play an MD with the Group function

on if there are no tracks with group registrations.

The sound has a lot of static.

Strong magnetism from a television or a similar
device is interfering with operations. Move the
deck away from the source of strong magnetism.

The deck does not record.

• The deck is not connected properly to the

program source. Check the connection (page 8).

• Select the correct program source using INPUT.
• The recording level is not adjusted properly.

Adjust the recording level (page 16).

• A premastered MD is inserted. Replace it with a

recordable MD.

• There is not enough time left on the MD. Replace

it with another recordable MD with fewer
recorded tracks, or erase unnecessary tracks
(page 25).

• There has been a power failure or the AC power

cord has been disconnected during recording.
Data recorded to that point may be lost. Repeat
the recording procedure.

The deck does not perform Synchro-recording
with a CD player or video CD player.

The remote supplied with the MD deck is not set
correctly. Reset the remote.

A message and a three- or five-digit
alphanumeric code alternate in the display.

The Self-diagnosis function is on (page 44).

The keyboard does not operate (MDS-JE770
only).

Disconnect the keyboard, then re-connect it.

Note

If the deck does not operate properly even after you
have attempted the prescribed remedies, turn off the
deck, then re-insert the plug into the power outlet.

The deck’s self-diagnosis function
automatically checks the condition of the MD
deck when an error occurs, then issues a three-
or five-digit code and an error message on the
display. If the code and message alternate, find
them in the following table and perform the
indicated countermeasure. Should the problem
persist, consult your nearest Sony dealer.

C11/Protected

, Take out the MD and close the record-protect

slot (page 14).

C12/Cannot Copy

• You tried to record a CD with a format that the

external device connected to the deck does not
support, such as CD-ROM or video CD.
, Remove the disc and insert a music CD.

C13/REC Error

, Set the deck in a stable surface, and repeat the

recording procedure.

• The inserted MD is dirty (with smudges,

fingerprints, etc.), scratched, or substandard in
quality.
, Replace the disc and repeat the recording

procedure.

C13/Read Error

, Take out the MD and insert it again.

C14/Toc Error

, Insert another disc.

, If possible, erase all the tracks on the MD

(page 26).

C41/Cannot Copy

• The sound source is a copy of commercially

available music software, or you tried to record a
CD-R (Recordable CD).
, The Serial Copy Management System

prevents making a digital copy (page 43). You
cannot record a CD-R.

Troubleshooting

Self-diagnosis function

Advertising
This manual is related to the following products: