Editing recorded mds, Before editing, To cancel the last edit – Sony MDS-JE770 User Manual
Page 25: To quit while editing, After editing, Erasing recordings, Erasing a single track, Erase function
Editin
g Rec
o
rd
ed
MDs
masterpage:Left
(3 column)
filename[\\WIN-48\NAKAYAMA 3-1\4233926121 3.14\423392612MDSJE770U2\GB05OPE-
U2.fm]
25
model name1[MDS-JE770] model name 2 [MDS-JE470]
[4-233-926-12(1)]
Editing Recorded MDs
Before editing
You can edit an MD only when:
•
The MD is recordable.
•
The MD play mode is normal play.
Note (MDS-JE770 only)
When the Group function is on, editing can be
performed only for the tracks registered into the
selected group.
To cancel the last edit
Use Undo Function to cancel the last edit and
restore the contents of the MD to the condition
before the edit.
To quit while editing
Press MENU/NO or x.
After editing
Press EJECT A to remove the MD or press
?/1 to turn off the deck.
“TOC” or “TOC Writing” starts flashing. The
TOC is updated and recording is completed.
Before disconnecting the AC power
cord
MD editing is completed when the MD Table of
Contents (TOC) is updated. The TOC is
updated when you eject the MD or press ?/1 to
turn off the deck. Do not disconnect the AC
power cord before updating the TOC (while
“TOC” is lit) or while updating the TOC (while
“TOC Writing” is flashing) to ensure a
complete editing.
The MD deck lets you erase unwanted tracks
quickly and easily.
The three options for erasing recordings are:
•
Erasing a single track (Track Erase Function)
•
Erasing all tracks (All Erase Function)
•
Erasing a portion of a track (A-B Erase
Function)
Erasing a single track
— Track Erase Function
You can erase a track simply by selecting its
track number. When you erase a track, the total
number of tracks on the MD decreases by one
and all the tracks following the erased one are
renumbered.
Example: Erasing track 2.
1
While the deck is stopped, playing, or
paused, press MENU/NO.
“Edit Menu” appears in the display.
2
Turn AMS (or press
./>
repeatedly) until “Tr Erase?” appears,
then press AMS or YES.
The deck starts to play the track indicated by
the number in the display.
3
Turn AMS (or press
./>
repeatedly) until the track number you
want to erase appears.
4
Press AMS or YES.
“Complete!” appears. The track following
the erased track starts to play. If the erased
track is the last one on the MD, the track
preceding the erased track starts to play.
Erasing recordings
— Erase Function
continued
1
1
2
3
2
3
4
A
A
C
D
B
C
D
Track
number
Erase track 2
After
ERASE
Original
tracks