Powersaver, Preset timing modes – Samsung 460UT-2 User Manual

Page 111

Advertising
background image

Class A (Information Communication equipment for industrial use) : 460UTn-2, 460UTn-

B

Attention dealers and users. This device is registered for EMC requirements for industrial use

(Class A) and can be used in areas other than general households.

Class B(Information Communication equipment for residential use) : 460UT-2, 460UT-B

This device is registered for EMC requirements for home use (Class B). It can be used in all

areas.(Class B equipment emits less electromagnetic waves than Class A equipment.)

PowerSaver

This LCD Display has a built-in power management system called PowerSaver. This system

saves energy by switching your LCD Display to low-power mode when it has not been used

for a certain amount of time. The LCD Display automatically returns to normal operation when

you press a key on the keyboard. For energy conservation, turn your LCD Display OFF when

it is not needed, or when leaving it unattended for long periods. The PowerSaver system

operates with a VESA DPM compliant video card installed in your computer. Use the software

utility installed on your computer to set up this feature.

PowerSaver

State

Normal Op-

eration

Power sav-

ing mode

Power off

Power off

(Power

Swich)

Power Indicator

On

Blinking

Amber

Off

Power Con-

sumption

(Typical)

460UTn-2

280 Watts

5 Watts

5 Watts

0 Watts

460UT-2

200 Watts

2 Watts

1 Watts

0 Watts

460UTn-B

240 Watts

5 Watts

5 Watts

0 Watts

460UT-B

185 Watts

2 Watts

1 Watts

0 Watts

Note

• The actual power consumption may be different from the indicated power consumption

above if the system conditions or settings are changed.

• To stop any power consumption, turn off the switch or disconnect the power cable on the

back. Be sure to disconnect the power if you intend to stay away from home for many

hours.

Preset Timing Modes

If the signal transferred from the computer is the same as the following Preset Timing Modes,

the screen will be adjusted automatically. However, if the signal differs, the screen may go

blank while the power LED is on. Refer to the video card manual and adjusts the screen as

follows.

Display Mode

Horizontal

Frequency

(kHz)

Vertical Fre-

quency (Hz)

Pixel Clock

(MHz)

Sync Polarity

(H/V)

IBM, 640 x 350

31.469

70.086

25.175

+/-

IBM, 640 x 480

31.469

59.940

25.175

-/-

IBM, 720 x 400

31.469

70.087

28.322

-/+

Specifications

89

Advertising
This manual is related to the following products: