Samsung 460UT-2 - Manual (Page 30)

Connecting Using a HDMI Cable
1. Connect an HDMI cable to [HDMI IN 2 (MAGICINFO)] (only with a
460UT-2, 460UT-B model) or [HDMI IN 1] on the product and the HDMI
output port on a digital device.
2. Press SOURCE on the product or remote control and select "HDMI1 /
HDMI2(only with a 460UT-2, 460UT-B model)"
Note
In HDMI mode, only PCM format audio is supported.
Connecting Using a DVI to HDMI Cable
Connect a DVI-HDMI cable to [HDMI IN 2 (MAGICINFO)] (only with a
460UT-2, 460UT-B model) or [HDMI IN 1] and the DVI output port on the
digital device.
Connect the red and white jacks of an RCA to stereo (for PC) cable to the
same colored audio output terminals of the digital output device, and con-
Connections
29