Samsung 460UT-2 - Manual (Page 70)

Note
Not available when Dynamic Contrast is set to On.
The color tones can be changed.
1. Off
2. Cool
3. Normal
4. Warm
5. Custom
Note
If you set the Color Tone to Cool, Normal, Warm, or Custom, the Color Temp. function is
disabled.
If you set the Color Tone to Off, the Color Control function is disabled
Color Control
Adjusts individual Red, Green, Blue color balance.
Note
Not available when Dynamic Contrast is set to On.
1. Red
2. Green
3. Blue
Color Temp.
Color Temp. is a measure of the 'warmth' of the image colors.
Note
• Not available when Dynamic Contrast is set to On.
• This function is only enabled if the Color Tone is set to Off.
Image Lock
Image Lock is used to fine-tune and get the best image by removing noise that creates un-
stable images with jitters and shakiness. If satisfactory results are not obtained using the Fine
adjustment, use the Coarse adjustment and then use Fine again.
Adjusting the LCD Display
48