Samsung MAX-VL85 - Manual (Page 24)

GB
24
If the timer switch on and off times are identical, the word ERROR is
displayed.
The timer enables you to switch the system on or off at
specific times.
Example:
You wish to wake up to music every morning.
If you no longer want the system to be switched on or off
automatically, you must cancel the timer.
Before setting the timer, check that the current time is correct.
For each step, you have a few seconds to set the required
options. If you exceed this time, you must start again.
Switch the system on by pressing On/Standby.
Press Timer/Clock until TIMER is displayed.
Press Enter.
Result:
ON TIME is displayed (instead of the equalizer symbols) for
a few seconds, followed by any switch-on time already set;
you can set the timer switch-on time.
Set the timer switch-on time.
a
Set the hour by tuning the Moving Jog knob to the right or to the left.
b Press Enter.
Result: The minutes flash.
c Set the minutes by tuning the Moving Jog knob to the right or to
the left.
d Press Enter.
Result:
OFF TIME is displayed (instead of the equalizer symbols)
for a few seconds, followed by any switch-off time already
set; you can now set the timer switch-off time.
Set the timer switch-off time.
a
Set the hour by tuning the Moving Jog knob to the right or to the left.
b Press Enter.
Result: The minutes flash.
c Set the minutes by tuning the Moving Jog knob to the right or to
the left.
d Press Enter.
Result:
VOL XX is displayed, where XX corresponds to the
volume already set.
Press Preset/Manual Down and Up to adjust the volume level and
press Enter.
Result: The source to be selected is displayed.
Turn the Moving Jog knob to select the source to be played when
the system switches on.
If you select... You must also...
TAPE (cassette) Insert a recorded cassette in one of
the decks before setting the
system to standby.
TUNER (radio) a Press Enter.
b Select the
FM or AM frequency
band by tuning the Moving Jog
knob to the right or to the left.
c Press Enter.
d Select a preset station by tuning
the Moving Jog knob to the right
or to the left.
CD (compact disc) a Load one or more compact discs.
b Select the required disc.
Press Enter to confirm the timer.
Press On/Standby to set the system to standby mode.
Result:
is displayed to the bottom left of the time, indicating that
the timer has been set. The system will switch on and off
automatically at the required times.
Timer Function
Enter
Up
Ne xt
Do wn
Pre vious
Preset/Manual
Menu Menu
On/
Standby Timer/ Clock
Timer/ On/Off
AUX Demo
Mute
Phones
Push Eject
Mono/ST
Band Select/
TUNER VCD/CD TAPE
Power Surrou
Program
CD Repeat
Shuffle CD Synchro
Reverse Mode
Deck 1/2 Counter
Reset
Dubbing
Normal High
Preset Memory
REC/Pause
AI Sleep R
Volume
Sound Mode
Subwoofer Le
Push Eje
Echo
Mic Mixing
Min Max MIC 1
MIC 2
Enter
t Pre v
Menu Menu
P
Pre vious Ne xt
7
8
9
5
6
1
2
3
4
1,9
4,5,7
3,4,5,6,7,8
To set the timer function
You may use Moving Jog or / buttons to adjust in step
4, 5, 6, 7.
2
6 6
MAX-VL85GB-19~30 5/26/03 13:16 Page 24