Samsung ML-1630W Series User Manual

Page 70

Advertising
background image

Installing Printer Software in Windows

8

4

Select Typical installation for a network printer. Click

Next.

N

OTE

: If your printer is not connected to the network, the

following window will appear. Select a setup option you want,

click Next.

Then the Set IP Address window appears. Do as follows:

1.Select a printer to be set with a specific IP address from the
list.

2.Configure an IP address, subnet mask, and gateway for the

printer manually and click Configure to set the specific IP
address for the network printer.
3.Click Next, and go to step 6.
• You can also set the network printer via SyncThruTM Web

Service, an embedded web server. Click Launch SWS on

Set IP Address window. Your machine’s embedded website

opens.

5

The list of printers available on the network appears.
Select the printer you want to install from the list and then
click Next.

• If you do not see your printer on the list, click Update to

refresh the list, or select Add TCP/IP Port to add your
printer to the network. To add the printer to the

network, enter the port name and the IP address for the
printer.

To verify your printer’s IP address or the MAC address,
print a Network Configuration page.

• To find a shared network printer (UNC Path), select

Shared Printer [UNC] and enter the shared name
manually or find a shared printer by clicking the Browse
button.

N

OTE

: If you cannot find your machine in network, please turn

off the firewall and click Update.
For Windows operating system, click StartControl Panel
and start windows firewall, and set this option unactivated. For
other operating system, refer to its on-line guide.

6

After the installation is finished, a window appears asking
you to print a test page and to register yourself as a user
of Samsung Printers in order to receive information from

Samsung. If you so desire, select the corresponding
checkbox(es) and click Finish.

Advertising