Sony BW-RS101 - Manual (Page 6)

6
System Configuration
C
h
ap
te
r 1
In
tr
od
u
c
ti
on
System Configuration
BW-RS101 System Configuration
The BW-RS101 is connected to a host computer through its SCSI interface. A
maximum of fifteen peripheral devices can be connected in a daisy chain on the
SCSI bus. See “SCSI Cables” on page 13 for details.
Note
The BW-RS101 supports single-ended (SE) and low-voltage differential (LVD)
SCSI configurations. When a single daisy chain is both of the LVD and SE
configuration, the transfer rate conforms to SE specifications.
BW-RU101 System Configuration
The BW-RU101 is connected to a host computer through its USB interface. A
maximum of 127 peripheral devices can be connected to a host computer
through USB Hub. See “USB Cables” on page 14 for details.
Note
The BW-RU101 complies with Hi-Speed USB (USB 2.0), which also complies
to USB 1.1. Although with Hi-Speed USB the maximum transfer rate is 480
Mbps, with USB 1.1 the transfer rate conforms to the USB 1.1 specification of
a maximum 12 Mbps.
BW-RS101
ID=0 ID=1 ID=2 ID=3 ID=4
ID=5
ID=14 ID=15
Host computer
SCSI peripheral devices
SCSI cable 12 m