Connecting the tv, Cable system and vhf/uhf antenna system, Cable box/digital cable box and antenna – Sony KDS-55A2020 User Manual

Page 14

Advertising
background image

Getting Started

14

KDS-50A2020/KDS-55A2020/KDS-60A2020

3-198-047-11(1)

F:\Worker\SONY SX-A Black\3198047111\020GET.fm

masterpage:3 columns Right

Connecting the TV

To display clear crisp pictures, you must connect your TV correctly and
select the correct Wide Mode to display the picture in the correct aspect
ratio (see “Changing the Wide Screen Mode” on page 25). It is strongly
recommended that you connect the antenna/cable input using 75-ohm
coaxial cable to receive optimum picture quality signal. A 300-ohm twin
lead cable can be easily affected by radio noise and the like, resulting in
signal deterioration. If you use a 300-ohm twin lead cable, keep it as far
away from the TV as possible. Do not use an indoor antenna, which is
especially susceptible to radio noise.
You can also connect a variety of optional equipment to your TV (see page
15).
For multiple equipment connections, please refer to the separate Quick
Setup Guide.

Cable System and
VHF/UHF Antenna
System

Cable Box/Digital
Cable Box and
Antenna

Use this hookup if

Your cable company scrambles some channels, such as premium
channels. Viewing all channels requires a cable box.

You do not intend to hook up any other audio or video equipment to
your TV.

Press ANT to switch between VHF/UHF and cable.

Antenna cable

CATV cable

z

To change channels
using the cable box, set
your TV to channel 3 or
4 depending on the
cable box channel
output.

To set up the TV remote control, see “Programming the Remote
Control” on page 26.

Press SAT/CABLE to begin operating the cable box with the remote
control (see page 22). The indicator will light up.

Press ANT to switch between VHF/UHF and cable.

VHF/UHF

CABLE

IN

OUT

CATV cable

Rear of TV

Cable box

Coaxial
cable

Antenna
cable

Advertising
This manual is related to the following products: