Southwing SH305 - Manual (Page 5)

5
Accepting/rejecting* a call
When the phone rings (ring tone can
be heard in Headset), briefly press the
Push4
TM Button [2] once to accept the
call. Press and hold the Push4 TM Button
[2] for 1 second to reject the call.
Initiating a call from your mobile phone
Dial the number as usual with your
phone. If your Headset is on and the
phone has been correctly paired, your
phone will transfer the call to your
Headset.
Initiating a call with voice dialling
You may be able to initiate the voice
dialling function from your Headset
(your phone will need to support voice
dialling and voice tags need to be
entered). To activate, briefly press the
Push4
TM Button [2]. You will then be
able to speak the name of the person
you wish to call.
Ending a call
Press the Push4 TM Button [2] briefly dur-
ing a call and the call will be ended.
Disconnecting from the phone*
You may wish to disconnect the Head-
set from the phone in order to reduce
battery consumption. To do so, press
the Push4
TM Button 3 times on the
Headset when it is not in an active call.
If you want to pick up a call, you first
need to re-connect the Headset. To do
so, press the Push4
TM Button once
again on the Headset.
Battery life
To conserve battery life, your Headset
features an auto-sleep function. This
function switches the Headset off after
4 hours of inaction. Once your Headset
has entered auto-sleep, it can be
switched on again normally.
When the battery has only 10% charge
remaining, the Headset will produce an
audible warning tone sequence every
time a call is ended.
Resetting your Headset
Should your Headset stop responding,
try charging it for a few seconds. Your
Headset should now function again as
normal.
5. PUSH4 TM CALL*
Your Headset can be configured with a
specific Push4
TM call function. With the
Headset on, press and hold the
Push4
TM Button [2] for 1 second to call
directly to the configured number or
phone service.
In some cases, you can use this
function as your favourite number. To
do so, you will first need to save your
favourite number on the Headset.
This can only be done when you have
received a call (A) from this same num-
ber into your Headset (not made
through a hidden call). Once this
received call has ended (B), press and
hold both Vol+ [4] and Vol- [5] buttons
for 3 seconds, until you hear a series
of tones. The number from the last
received call will be stored. (C)
Now you can make a direct call to this
number at any time just by pressing
and holding the Push4
TM Button [2] for
1 second.
6. EXTENDED MENU
To activate the extended menu func-
tions, press the Vol+ [4], Vol- [5] and
Push4
TM [2] Buttons until the Indicator