Direct keypad dialing – Sharp FO-4450 User Manual

Page 46

Advertising
background image

Sending a Fax by Automatic Dialing

44

Direct Keypad Dialing

You can also enter a full number with the number keys and then press

to begin dialing.

START/
ENTER

1

Load the document(s). (Note: If
desired, you can load the document
after dialing in Step 2, below.)

SEND READY will appear in the
display.

Press

and/or

to

set the resolution and contrast if
needed.

To send the document ahead of other documents waiting for transmission,

press

.

To send the document directly from the feeder (not through memory), press

. (Flip up the Rapid Key overlay if it is down.)

2

Enter the number of the receiving machine by pressing the numeric
keys.

If a pause is required between any of the digits to access a special service

or an outside line, press

(two seconds per pause). The pause will

appear as a hyphen. Several pauses can be entered in a row.

3

Check the display. If the number of the receiving machine shown is

correct, press

.

If it is not correct, press

to backspace and clear one digit at a time,

and then re-enter the correct digit(s).

RESOLUTION

CONTRAST

PRIORITY

DOCUMENT

M/?

REDIAL

START/
ENTER

STOP

Advertising