Sony HKSR-5803SQ - Manual (Page 3)

1-1 (E)
HKSR-5803SQ/5803HQ
Section 1
Installation
Purpose of this manual
This manual is an installation manual of RGB SQ Proces-
sor Board HKSR-5803SQ and Advanced HQ Processor
Board HKSR-5803HQ.
This manual is intended for system and service engineers,
so describes information regarding installation.
Related manual
Besides this installation manual, the following manual is
available for HKSR-5803SQ and HKSR-5803HQ.
. Maintenance Manual (available on request)
This manual describes the information for the mainte-
nance of this unit and the information that premises the
parts level service.
If this information is required, please contact your local
Sony Sales Office/Service Center.
1-1. Specifications
General
HKSR-5803SQ
Dimensions (w/h)
SQ-20 Board: 155 x 90 mm
Mass SQ-20 Board: approx. 70 g
Power requirements +3.3 V dc: 840 mA
+1.5 V dc: 1800 mA
Power consumption approx. 5.5 W
HKSR-5803HQ
Dimensions (w/h)
DLP-27 Board: 155 x 90 mm
Mass DLP-27 Board: approx. 70 g
Power requirements +3.3 V dc 850 mA
+1.5 V dc: 1800 mA
Power consumption approx. 5.5 W
1-2. Installation Overview
Components
HKSR-5803SQ is composed of the following items:
. SQ-20 Board
. Hexagonal support 7 mm (4 pcs)
. PSW2.6 x 5.8 (8 pcs)
. Installation manual
HKSR-5803HQ is composed of the following items:
. DLP-27 Board
. Hexagonal support 7 mm (4 pcs)
. PSW2.6 x 5.8 (8 pcs)
. Installation manual
Applicable models
SRW-5800
Installations of HKSR-5803SQ or HKSR-5803HQ
The HKSR-5803SQ comprises the SQ-20 board.
Mount the SQ-20 board on the HPR-22 board.
The HKSR-5803HQ comprises the DLP-27 board.
Mount the DLP-27 board on the HPR-22 board.
Attach and adjust the HKSR-5803SQ or HKSR-5803HQ
properly, following the procedures in Section 1-3 and later.