Summit HP-1S - Manual (Page 11)

ASSEMBLY & DISASSEMBLY
DISASSEMBLY
A. Battery removal
For transportation
B
Unplug the battery connector from the controller connector underneath the seat
near the crossbar. Refer to Assembly, Section D, Connecting the main cables on
Page 8.
B
Unscrew the knobs and remove the battery bar at the rear batter y box.
B
Unplug the battery connector that joins the two batter y boxes together.
B
Slide out the battery boxes, one at a time.
B
Lift the battery boxes using the batter y strap.
For replacement
B
Unplug the battery connector from the controller connector underneath the seat
near the crossbar. Refer to Assembly, Section D, Connecting the main cables on
Page 8.
B
Unscrew the knobs and remove the battery bar at the rear batter y box.
B
Unplug the battery connector that joins the two batter y boxes together.
B
Slide out the battery boxes, one at a time.
B
Lift the battery boxes using the batter y strap.
B
Unlock the battery strap and remove the batter y box cover.
B
Remove the battery post caps.
B
Unscrew positive terminals (+) one at a time.
B
Unscrew negative terminals ( ) one at a time.
B
Remove batteries one at a time.
B
For installing the batteries, refer to Assembly, Section B, Installing the Batteries on
page 7.
Page 9