Sony FST-ZX100D - Manual (Page 55)

So
un
d Ad
ju
stmen
t
55 US
To turn off the subwoofer
Press SUBWOOFER ON/OFF on the
subwoofer again.
Tip
To adjust the volume of all speakers at the same time,
press VOLUME +/– repeatedly (or turn MASTER
VOLUME on the unit).
— X-TRANCE/X-TRANCE PRO
You can create a party environment by using
X-TRANCE (MHC-GN1000D only) or
X-TRANCE PRO (FST-ZX100D/
LBT-ZX100D/FST-ZX80D/LBT-ZX80D
only).
The following table shows the sound effect
available for X-TRANCE and X-TRANCE
PRO.
Use the buttons on the unit for the operation.
Flashing sound effect
— SOUND FLASH
(MHC-GN1000D only)
With the sound flash function, you can flash the
sound output. The sound cuts off periodically.
Hold down SOUND FLASH during
playback.
The flashing effect is activated.
To cancel the flashing effect
Release SOUND FLASH.
To change the sound flash speed
Hold down SOUND FLASH and turn
OPERATION DIAL clockwise or
counterclockwise to change the sound flash
speed (1 ~ 20).
Tip
• The power illuminator will synchronize with the
selected SOUND FLASH effect.
Flanging sound effect
— FLANGER
You can flange the sound output with the sound
flange function.
Press FLANGER repeatedly to select the
FLANGER effect you want.
The FLANGER indicator lights up.
1)
FST-ZX100D/LBT-ZX100D/FST-ZX80D/
LBT-ZX80D only.
2)
MHC-GN1000 only.
To cancel the FLANGER effect
Press FLANGER repeatedly to select
“FLANGER OFF”.
Notes
• You can only select the FLANGER effect in DVD
function.
• The FLANGER effect is automatically set to
“FLANGER OFF” when you:
– turn off the system.
– change the function.
– select the DELAY or CHORUS effect.
• If you activate FLANGER during disc recording, the
sound effect will be recorded onto the tape.
Creating a party
environment
Sound effect X-TRANCE X-TRANCE PRO
SOUND FLASH
•
FLANGER
• •
DELAY
• •
CHORUS
•
X-ROUND
•
X-BEAT
•
Select To create
FLANGER 1
1)
or
FLANGER ON
2)
a deep flanging effect that is
similar to the roar of a jet
plane.
FLANGER 2
1)
a standard flanging tone.
continued