Sony FST-ZX100D - Manual (Page 65)

Ti
mer
65 US
Other operations
Notes
• You cannot select the Play Timer and the Timer
Recording at the same time.
• If you use the Play Timer and the Sleep Timer at the
same time, the Sleep Timer has priority.
• The Play Timer will not be activated if the system is
turned on or if “STANDBY” flashes in the display.
Tips
• The system turns on 30 seconds before the preset
time.
• When Play Timer is selected, “PLAY” lights up in
the display.
You can record from a preset radio station from
a specified time.
To make timer recording, you must first preset
the radio station (see “Presetting radio stations”
on page 47) and set the clock (see “Setting the
clock” on page 13).
1
Tune in the preset radio station (see
“Listening to a preset radio station” on
page 49).
2
Press TIMER MENU.
3
Press
V
or
v
repeatedly to select “REC
SET?”, then press ENTER.
“ON” appears and the hour indication
flashes in the display.
4
Set the time to start recording.
Press
V
or
v
repeatedly to set the hour,
then press ENTER.
The minute indication flashes in the
display.
Press
V
or
v
repeatedly to set the minute,
then press ENTER.
“OFF” appears and the hour indicator
flashes in the display.
5
Set the time to stop recording following
the same procedure as step 4.
The type of timer (“REC”), followed by the
start time, the stop time and the preset radio
station to be recorded (e.g., “TUNER FM
5”) appears in the display in sequence
before the original display returns.
6
Load a recordable tape into Deck B.
Make sure the tape is in the front side.
7
Press DIRECTION on the unit
repeatedly to select “
g ” to record on
one side or “ j ” (or “RELAY”) to
record on both sides.
When recording from the reverse side, press
FUNCTION +/– (or TAPE A/B on the unit)
repeatedly to select “TAPE B”. Then, press
H
(or nN on the unit) repeatedly until
the TAPE B reverse side indicator lights up
to start playback of the reverse side. Press
x at the point where you want to start
recording.
When you record on both sides, be sure to
start from the front side. If you start from
the reverse side, recording stops at the end
of reverse side.
8
Press ?/1 to turn off the system.
To Do this
Check the setting 1 Press TIMER MENU.
“TIMER SELECT?” flashes
in the display.
2 Press ENTER.
3 Press
V
or
v
repeatedly to
select “PLAY SELECT?”,
then press ENTER.
Change the setting Start from step 1.
Cancel the Play
Timer 1 Press TIMER MENU.
“TIMER SELECT?” flashes
in the display.
2 Press ENTER.
3 Press
V
or
v
repeatedly to
select “TIMER OFF?”, then
press ENTER.
Timer recording radio
programs
continued