Sony FST-ZX100D - Manual (Page 67)

Displa
y
67 US
Use the buttons on the unit for the operation.
1
Press AMP MENU repeatedly to select
“SPECTRUM”.
The last selected spectrum setting appears
in the display.
2
Turn OPERATION DIAL clockwise or
counterclockwise to select the setting
you want.
The display changes cyclically as follows:
SPECTRUM 1 y SPECTRUM 2 y
SPECTRUM 3 y SPECTRUM 4 y
SPECTRUM 5 y SPECTRUM OFF
3
Press ENTER.
FST-ZX100D/LBT-ZX100D/FST-ZX80D/
LBT-ZX80D only
When X-ROUND mode is selected
1
Press AMP MENU repeatedly to select
“X-POSITION”.
The last selected spectrum setting appears
in the display.
2
Turn OPERATION DIAL clockwise or
counterclockwise to select the setting
you want.
The display changes as follows:
X-POS ON* y X-POS OFF
*The spectrum analyzer display will synchronize
with the selected X-ROUND effect.
3
Press ENTER.
Use the buttons on the unit for the operation.
1
Press AMP MENU repeatedly to select
“DIMMER”.
The last selected dimmer setting appears in
the display.
2
Turn OPERATION DIAL clockwise or
counterclockwise to select the setting
you want.
The display changes cyclically as follows:
DIMMER 1 y DIMMER 2 y
DIMMER OFF
3
Press ENTER.
Press ILLUMINATION on the unit
repeatedly to select the power illuminator
you want when the system is turned on.
Each time you press the button, the power
illuminator changes cyclically as follows:
PATTERN 1 t PATTERN 2 t
PATTERN 3 t PATTERN 4 t
PATTERN OFF
FST-ZX100D/LBT-ZX100D/
FST-ZX80D/LBT-ZX80D only
When X-ROUND mode is selected
Press ILLUMINATION on the unit
repeatedly to select the power illuminator
you want.
Each time you press the button, the power
illuminator changes as follows:
PATTERN OFF y X-PATTERN*
* The power illuminator will synchronize with the
selected X-ROUND effect.
Changing the spectrum
analyzer display Adjusting the brightness
of the front panel display
Changing the power
illuminator
continued