Sony FST-ZX100D - Manual (Page 72)

72 US
A VIDEO INPUT VIDEO jack
Use a video cord (not supplied) to connect the
video output jack of the VCR to this jack. You
can then output video signal through this system.
B VIDEO INPUT AUDIO L/R jacks
Use audio cords (not supplied) to connect the
audio output jacks of the VCR to these jacks.
You can then output audio signal through this
system.
C TV/SAT AUDIO IN L/R jacks
Use audio cords (not supplied) to connect the
audio output jacks of an optional component
(such as TV or satellite tuner) to these jacks.
You can then output audio signal through this
system.
D VIDEO OUT jack
Use a video cord (supplied) to connect the video
input jack of the TV to this jack.
E COMPONENT VIDEO OUT
jacks
Use component video cords (not supplied) to
connect the component video input jacks of the
TV or projector to these jacks. If your TV accept
progressive format signals, you must use this
connection and press PROGRESSIVE on the
unit repeatedly to select “P AUTO” or “P
VIDEO”. You can enjoy higher quality video
images.
Note
You cannot output the video signal from the VIDEO
INPUT VIDEO jack through the COMPONENT
VIDEO OUT jacks of this unit.
F S VIDEO OUT jack
Use an S video cord (not supplied) to connect
the S video input jack of the TV to this jack. You
can enjoy higher quality video images.
Note
You cannot output the video signal from the VIDEO
INPUT VIDEO jack through the S VIDEO OUT jack
of this unit.
G AUDIO OUT jacks
Use audio cords (not supplied) to connect the
audio input jacks of an optional component
(such as VCR) to these jacks. You can then
output audio signal to that component from this
system.
Note
There is no audio output from these jacks when you
select the VIDEO, SAT or TV function.
H D-LIGHT SYNC OUT jack
Connect the D-LIGHT SYNC controller to this
jack. You need to connect the D-LIGHT SYNC
controller to a lighting device* (not supplied).
The lighting device will react according to the
control signals transmitted by the D-LIGHT
SYNC controller upon receiving music source
from the system. For details on the use of the
D-LIGHT SYNC controller and lighting device,
refer to the operating instructions supplied with
the respective device.
* Refer to the operating instructions supplied
with the D-LIGHT SYNC controller for the
recommended lighting device.
Note
The lighting effect may be different depending on the
connected lighting device or the type of music being
played back.
I SUBWOOFER OUT jack
(FST-ZX80D and LBT-ZX80D only)
Use an audio cord (not supplied) to connect the
audio input jack of an optional subwoofer* to
this jack.
* SA-GNV111D is recommended.
In some areas, the SA-GNV111D may not yet be
available.
Note
The effect may be limited or noise may occur
depending on the connected subwoofer or the type of
music being played back. For details, consult your
nearest Sony dealer.
D-LIGHT SYNC
controller cord