Sony FST-ZX100D - Manual (Page 80)

80 US
When displaying the version number on the
TV screen
When you turn on the system, the version
number [VER.X.XX] (X is a number) may
appear on the TV screen. Although this is not a
malfunction and for Sony service use only,
normal system operation will not be possible.
Turn off the system, and then turn on the system
again to operate.
One of the following messages may appear or
flash in the front panel display during operation.
Disc
Cannot Play
• A disc that cannot be played back was inserted.
• A DVD VIDEO with unsupported region code
was inserted.
No Disc
There is no disc on the disc tray.
Push STOP!
You have pressed the buttons whose operation is
only possible when playback is stopped.
Reading
The system is reading information of the disc. Some
buttons are not available.
Please Wait
The system is doing initialization process.
Data Error
• The MP3 audio track and JPEG image file you
want to play back is damaged.
• The MP3 audio track does not conform to MPEG
1 Audio Layer 3 format.
• The JPEG image file does not conform to DCF
format.
• The MP3 audio track has the extension “.MP3”
but it is not in MP3 format.
• The JPEG image file has the extension “.JPG” or
“.JPEG” but it is not in JPEG format.
PASSWORD
Custom Parental Control or Parental Control is set.
Tape
No Tab
You cannot record the tape because the tab has been
removed from the tape.
No Tape
There is no tape in the tape deck.
Timer
OFF TIME NG!
The on time and off time of Play Timer or Timer
Recording is the same.
Others
Not in Use
You have pressed a button whose operation is not
allowed or invalid at that time.
Invalid
You have pressed an invalid button.
Messages
VER.X.XX