Sony Cyber-shot 3-294-896-12(1) - Manual (Page 58)

58
Shooting menu For details on the operation 1 page 43
• For details on the white balance, see page 10.
• Under fluorescent lights that flicker, the white balance function may not work correctly even though you
select [Fluorescent Light 1], [Fluorescent Light 2] or [Fluorescent Light 3].
• When shooting with a flash in other than [Flash] mode, [White Balance] is set to [Auto].
• When
(Underwater) mode is selected in the Scene Selection, you can use [Underwater White
Balance] instead of [White Balance].
Adjusts the color tone during (Underwater) mode (page 29).
• Depending on the color of the water, sometimes good adjustment is not possible regardless of whether
[Underwater 1] or [Underwater 2] is selected.
• When shooting with a flash in other than [Flash] mode, [Underwater White Balance] is set to [Auto].
Adjusts the amount of flash light.
• To change flash mode, see page 26.
• If the subject is too bright or dark, this adjustment may have no effect.
(Flash) Adjusts for the flash conditions.
• You cannot select this item when shooting movies.
Underwater White Balance: Adjusting color tones during Underwater mode
(Auto) The camera automatically adjusts color tones underwater so
they appear natural.
(Underwater 1) Adjusts for underwater conditions where blue is strong.
(Underwater 2) Adjusts for underwater conditions where green is strong.
(Flash) Adjusts for use of flash underwater.
Flash Level: Adjusting the amount of flash light
(–) Makes the flash level lower.
(Normal)
(+) Makes the flash level higher.