Sony Cyber-shot 3-294-896-12(1) - Manual (Page 86)

86
Settings For details on the operation 1 page 74
Shooting Settings — Shooting Settings 2
The default settings are marked with .
When the camera is rotated to shoot a portrait (vertical) image, the camera records its position
change and displays the image in the portrait position.
• Black is displayed to the left and right of vertical orientation images.
• Depending on the shooting angle of the camera, the orientation of the image may not be recorded
correctly. If an image is not recorded in the correct orientation, you can rotate the image, following the
procedure on page 72.
• You cannot use the Auto Orientation when (Underwater) mode is selected in the Scene Selection
mode.
Displays the recorded image on the screen for approximately two seconds immediately after
shooting a still image.
• If you press the shutter button halfway down, the recorded image display disappears and you can
immediately shoot the next image.
• You cannot use the Auto Review when:
– Burst/Bracket shooting
– [Scene Recognition] is set to [Auto] or [Advanced].
Auto Orientation
On Records the image with the correct orientation.
Off Does not use Auto Orientation.
Auto Review
On Uses the Auto Review.
Off Does not use Auto Review.