Samsung Digimax 130 - Manual (Page 32)

32
SETTING UP THE FUNCTION
Setting up the function by using the LCD panel
This function is used when the photographer would also like to be in the picture.
The Self-timer mode can only be set under RECORD mode.
Press the Self-timer button( ) to activate it.
- The Self-timer lamp(red) is turned on.
Press the Shutter button to activate.
When you press the Self-timer button, the Self-timer lamp blinks slowly for 7 seconds.
The lamp will blink rapidly for a further 3 seconds before the picture is taken.
Refer to page 13.
Selecting the Self-timer mode
Checking the battery
1
2
3