Samsung Digimax 130 - Manual (Page 46)

46
Setting up the function by using the LCD monitor
SETTING UP THE FUNCTION
RESET TO DEFAULT
returns all the camera settings to the factory default settings.
Turn the power on.
Set the camera to SETUP mode and SETUP menu
will be displayed on the LCD monitor.
Use the Menu select button ( / ) to select
RESET TO DEFAULT.
Press the Enter button and the cursor will skip
to the RESET TO DEFAULT data field.
Use the Menu select button to select data(YES, NO).
After selecting YES, press the Enter button again to make the change and the cursor will
return to the SETUP menu automatically.
After selecting NO, press the Enter button again to discard RESET TO DEFAULT and the
cursor will return to the SETUP menu automatically.
ITEM DEFAULT
Resolution 1280 960
Super fine quality
Auto
Auto
ON
0
0.0
2 seconds
ON
NTSC
Quality
White Balance
Flash
Quickview
LCD Brightness
EV Compensation
Slide Show Delay
SOUND
VIDEO
1
2
3
4
5
SETUP MENU
YES NO
DATE / TIME
LANGUAGE
SOUND
FORMAT MEDIA
VIDEO MODE
RESET TO DEFAULT