Sharp UX-600M - Manual (Page 21)

UX600MU-ISIM DB <P=001>
Installing the Multifunction Interface Software
The Multifunction Interface software allows you to perform fax operations from
your computer and lets you use your fax as a scanner and printer. Install the soft-
ware from your Sharp Multifunction Interface CD-ROM.
♦
You must be running Microsoft Windows
(TM)
3.1 or higher, or Windows
’95 to install the Sharp Multifunction Interface as a Windows application.
♦
For general information on installation and management of Windows’ appli-
cations, refer to your Microsoft Windows User’s Guide.
To install the Multifunction Interface software, follow these steps:
1
Make sure your fax is connected to your computer via the PC Interface box as
described in "Connections" in this chapter.
2
Make sure your fax is powered on (plug in the power cord).
3
Run Windows
(TM)
3.1 or higher, or Windows ’95.
4
Close any other Windows applications which may be running.
5
Insert the Sharp Multifunction Interface CD in your computer’s CD-ROM
drive. (Note: Some systems automatically install the software when the CD is
inserted in the CD-ROM drive. Advance to Step 7 if your system automat-
ically installs the Multifunction Interface software.)
6
Windows 3.1 or higher users:
Select the Windows Program Manager.
Select the File drop-down menu and select the Run command. The command
screen will appear, displaying the command line. At the command line, type
the letter of your CD-ROM drive followed by Install.exe, and click OK.
Windows ’95 users:
Select Start, and select Run. At the command line, type the letter of your CD-
ROM drive and then click OK. Double click on the Install.EX E icon in the
window that appears.
♦
If you have previously installed the Sharp Multifunction software, an open-
ing screen will appear. Select the Install Sharp button.
Chapter 1 Installation
9