Sharp UX-600M - Manual (Page 35)

UX600MU-IPRM DD <P=001>
Selecting the Reception Mode
Your fax has two modes for receiving incoming calls and faxes:
AUTO mode: In AUTO mode, the fax will automatically answer all calls after
four rings and receive the incoming document.
MANUAL mode: In MANUAL mode, you must answer all calls, including fax
messages, using the fax’s handset or an extension phone connected to the same
line.
If you only intend to receive fax messages on the line connected to your fax ma-
chine, select AUTO mode. In this case, you will probably want to change the
number of rings your fax waits before answering to one or two rings. This is
done by setting Option Setting 2 as described in Chapter 9, "Optional Settings".
If you intend to receive both fax messages and voice calls on the line connected
to your fax machine, you can use either AUTO or MANUAL mode. In the case
of AUTO mode, you must answer incoming calls before the fax does, but the
fax will be able to receive fax messages at times when you are unable to answer
personally. For more information on using AUTO and MANUAL modes, see
Chapter 4, "Receiving Documents".
Setting the reception mode
Set the mode of reception with the
RECEPTION MODE key on the panel.
•
To select AUTO, press the key until
"AUTO" appears in the display.
•
To select MANUAL, press the key un-
til "MANU" appears in the display.
RECEPTION
MODE
Chapter 2 Initial Settings
23