Sharp UX-600M User Manual

Page 52

Advertising
background image

<P=004>

Using the HOLD/SEARCH key

If you don’t remember the Rapid Key or Speed Dial number in which you have
stored a particular fax number, you can search for the number by following the
steps below. Once you have found the number, you can dial it and transmit the
loaded document by simply pressing the START key.

1

Press the HOLD/SEARCH key.

2

Enter the first letter of the stored name
by pressing the appropriate number key
(the key below the marked letter) one or
more times until the letter appears in the
display. If the name begins with a spe-
cial character or number, press "1".

If you don’t remember the first letter,
go to Step 3 (you will scroll through
the list from the beginning).

If a name wasn’t stored for the num-
ber, press "0". This will cause num-
bers, not names, to appear when you
scroll.

3

Press the "#" key or the "

*" key to scroll

through the names (numbers if you
pressed "0"). Stop when the desired
name appears in the display.

If no names have been stored that be-
gin with the entered letter, you will
scroll from the next name, in alphabeti-
cal order, in the list. If no names/num-
bers have been stored at all, NO
DATA will appear.

4

Press the START key. The document
will be automatically transmitted once
the connection is made.

or

HOLD/

SEARCH

1

2

3

4

5

6

7

8

9

0

GHI

JKL

MNO

TUV

WXYZ

PQRS

ABC

DEF

START

Chapter 3 Sending Documents

40

Advertising