Sharp UX-600M - Manual (Page 75)

(Example)
<P=002>
5
Press the START key. Transmission will
begin.
•
A Transaction Report is automatically
printed out after Broadcasting is com-
pleted. Check the "Note" column of the
report to see if any of the locations are
marked "Busy" or have a communica-
tion error code. If so, send the docu-
ment to those locations again.
Broadcasting using a Group Key
If the fax machines to which you want to broadcast have all been programmed
into one Group Key, you can perform the broadcasting operation using the fol-
lowing simplified procedure:
1
Load the document(s).
•
Make any desired transmission set-
tings (resolution, contrast, etc.).
2
Press the appropriate Group Key. Trans-
mission will begin.
START
18/G1
37
Chapter 8 Special Functions
63