Timer operations – Sharp UX-600M User Manual
Page 79
UX600MU-SFTI
YF
<P=001>
Timer Operations
The Timer function allows you to set a transmission and/or polling operation to
be performed automatically at a time you specify. One transmission operation
and one polling operation can be set at the same time, and the times they will be
performed can be specified up to 24 hours in advance.
As an example, you can use this function to take advantage of off-peak tele-
phone rates without having to be there when the operation is performed.
Note: Only a Speed Dial number can be used to dial the receiving machine.
Setting a timer operation
1
Press the keys shown at right.
TIMER MODE will appear in the dis-
play.
1
FUNCTION
2
Press "#" to set a transmission operation
(SEND MODE), or "
*" to set a polling
operation (POLLING MODE).
or
3
Press "1" to select SET.
4
Enter the time at which you want the op-
eration to take place (2 digits for the
hour and 2 digits for the minute).
(Example: 9:25)
5
Press "
*" to select A.M., or "#" to select
P.M.
or
6
Press the START key.
1
0
9
2
5
START
Chapter 8 Special Functions
67