Step 4 : connecting hdmi/dvi to a tv, Connecting & setting up 24 - english, Connecting to a tv with hdmi jack – Samsung DVD-R145 User Manual
Page 24
C
onnecting &
Setting Up
24 - English
Step 4 : Connecting HDMI/DVI to a TV
If your TV has a HDMI/DVI input, connect HDMI/DVI cable to a TV. You will enjoy the best quality images and sounds.
Connecting to a TV with HDMI Jack
Using the HDMI- HDMI cable connect the HDMI OUT jack on the rear of the DVD Recorder to the HDMI IN jack of
your TV.
Press the input selector on your TV remote control until the HDMI signal from the DVD Recorder appears on your TV
screen.
HDMI OUT
■
To watch through the HDMI output, set the digital audio
output to PCM.(See page 35~36)
■
Depending on the HDMI device(TV/HDMI Receiver) you
use, audio may not be supported. If TV does not support
Dolby digital/DTS, Audio output is not available when you
set Digital output as Bitstream or select DTS On in Audio
setup menu. In this case, set the digital audio ouput to PCM
or DTS Off.
Caution
01050A-R145-XAA-ENG-14-30 2006.4.11 6:1 PM Page 24