Sony RDP-X80iP User Manual

Personal audio docking system, Audio in dc in 20v, Warning

Advertising
background image

RDP-X80iP_4-182-698-82(2)_CEK

WARNING

To reduce the risk of fire or electric shock, do not

expose this apparatus to rain or moisture.
To reduce the risk of fire, do not cover the ventilation of

the apparatus with newspapers, tablecloths, curtains, etc.

And do not place lighted candles on the apparatus.
To reduce the risk of fire or electric shock, do not expose

this apparatus to dripping or splashing, and do not place

objects filled with liquids, such as vases, on the

apparatus.
Do not install the appliance in a confined space, such as a

bookcase or built-in cabinet.
Do not expose the batteries (battery pack or batteries

installed) to excessive heat such as sunshine, fire or the

like for a long time.
As the main plug is used to disconnect the unit from the

mains, connect the unit to an easily accessible AC outlet.

Should you notice an abnormality in the unit, disconnect

the main plug from the AC outlet immediately.
The unit is not disconnected from the AC power source

(mains) as long as it is connected to the wall outlet, even

if the unit itself has been turned off.
The nameplate and important information concerning

safety are located on the bottom exterior of main unit

and on the surface of AC power adaptor.

CAUTION

Danger of explosion if battery is incorrectly replaced.

Replace only with the same type.
Notice for customers: the following information is

only applicable to equipment sold in countries

applying EU directives

The manufacturer of this product is Sony Corporation,

1-7-1 Konan Minato-ku Tokyo, 108-0075 Japan. The

Authorized Representative for EMC and product safety is

Sony Deutschland GmbH, Hedelfinger Strasse 61, 70327

Stuttgart, Germany. For any service or guarantee matters

please refer to the addresses given in separate service or

guarantee documents.
The validity of the CE marking is restricted to only those

countries where it is legally enforced, mainly in the

countries EEA (European Economic Area).

Features

• Compatible with iPod/iPhone

• Rechargeable battery for portable use

• Audio in function

• Wireless remote commander supplied

Precautions

• Operate the unit on the power source specified in

“Specifications.”

• To disconnect the AC power cord (mains lead), pull it

out by the plug, not the cord.

• Since a strong magnet is used for the speaker, keep

personal credit cards using magnetic coding or spring-

wound watches away from the unit to prevent possible

damage from the magnet.

• Do not leave the unit in a location near a heat source

such as a radiator or airduct, or in a place subject to

direct sunlight, excessive dust, mechanical vibration, or

shock.

• Allow adequate air circulation to prevent internal heat

build-up. Do not place the unit on a surface (a rug, a

blanket, etc.) or near materials (a curtain) which might

block the ventilation holes.

• Should any solid object or liquid fall into the unit,

unplug the unit and have it checked by qualified

personnel before operating it any further.

• To clean the casing, use a soft cloth dampened with a

mild detergent solution.

NOTES ON LITHIUM BATTERY

• Wipe the battery with a dry cloth to assure a good

contact.

• Be sure to observe the correct polarity when installing

the battery.

• Do not hold the battery with metallic tweezers,

otherwise a short-circuit may occur.

Disposal of Old Electrical & Electronic

Equipment (Applicable in the European

Union and other European countries

with separate collection systems)

This symbol on the product or on its packaging indicates

that this product shall not be treated as household waste.

Instead it shall be handed over to the applicable

collection point for the recycling of electrical and

electronic equipment. By ensuring this product is

disposed of correctly, you will help prevent potential

negative consequences for the environment and human

health, which could otherwise be caused by inappropriate

waste handling of this product. The recycling of materials

will help to conserve natural resources. For more detailed

information about recycling of this product, please

contact your local Civic Office, your household waste

disposal service or the shop where you purchased the

product.

Applicable accessory: Remote Commander.

Disposal of waste batteries

(applicable in the European Union

and other European countries with

separate collection systems)

This symbol on the battery or on the packaging indicates

that the battery provided with this product shall not be

treated as household waste.

On certain batteries this symbol might be used in

combination with a chemical symbol. The chemical

symbols for mercury (Hg) or lead (Pb) are added if the

battery contains more than 0.0005% mercury or 0.004%

lead.

By ensuring these batteries are disposed of correctly, you

will help prevent potentially negative consequences for

the environment and human health which could

otherwise be caused by inappropriate waste handling of

the battery. The recycling of the materials will help to

conserve natural resources.
In case of products that for safety, performance or data

integrity reasons require a permanent connection with

an incorporated battery, this battery should be replaced

by qualified service staff only.

To ensure that the battery will be treated properly, hand

over the product at end-of-life to the applicable

collection point for the recycling of electrical and

electronic equipment.
For all other batteries, please view the section on how to

remove the battery from the product safely. Hand the

battery over to the applicable collection point for the

recycling of waste batteries.
For more detailed information about recycling of this

product or battery, please contact your local Civic Office,

your household waste disposal service or the shop where

you purchased the product.
If you have any questions or problems concerning your

unit, please consult your nearest Sony dealer.

4-182-698-82(2)

Personal Audio

Docking System

RDP-X80iP

©2010 Sony Corporation

Printed in China

Operating Instructions

Preparing a power source

Charge the rechargeable battery before using this unit for

the first time, or when the battery is depleted. You can

operate the unit while charging.

1

Connect the AC power cord (supplied) to the AC

power adaptor (supplied).

2

Connect the AC power adaptor to the

DC IN 20V

jack on the back of this unit firmly and plug it into a

wall outlet.

AUDIO IN

DC IN 20V

AC power

adaptor

AC power

cord

To wall

outlet

Note on the AC power adaptor

• Use the Sony supplied AC power adaptor only. The polarity of the

plugs of other manufactures may be different. Failure to use the

supplied AC power adaptor may cause the unit to malfunction.

3

Confirm that charging has started.
When charging start, the battery indicator appears.

While charging, the charging indicator animation

loops.

When the unit is turned off

When charging completes, the full battery indicator

appears for a while, and then disappears.



Notes

• If you connect the AC power adaptor when the battery is fully

charged, the full battery indicator appears for a while, and then

disappears.

• If you connect the AC power adaptor when the battery power is low,

charging starts and the low battery and charging indicator

animation loops.

The unit cannot perform operations without the AC

power adaptor while the low battery indicator

appears.

 

When the unit is turned on

When charging completes, the full battery indicator

appears.

Note

• It will take approximately 7 hours to charge the battery.

Power sources

Using the rechargeable

battery

You can operate the unit with the rechargeable battery

instead of the AC power adaptor.
Note

• The maximum output will be lower when the AC power adaptor is

disconnected.

To check the remaining power of the

battery

The remaining power of the battery will be indicated

when the unit is turned on. As the remaining battery

power depletes, the battery indicator decreases.

Level 1

Level 2

Level 3

Level 4

When the battery becomes almost fully depleted, “LOW

BATT” flashes and the unit will turn off. To charge the

battery, connect the AC power adaptor. ( See “Preparing

a power source.”)

 

Notes

• The remaining battery power will not be indicated when the unit is

turned off.

• The unit requires at least 30 minutes to charge the battery if “LOW

BATT” appears.

• The battery indicator shows approximate remaining battery power.

• Operating conditions will affect the rate of battery depletion.

Battery life

When

Battery life

Playback of iPod

approx. 7hours*

Measured in accordance with the JEITA (Japan

Electronics and Information Technology Industries

Association) standard.

* Playback time measured using a fully charged rechargeable battery

with a fully charged iPod classic.

When to replace the rechargeable

battery pack

Repeated recharging causes the capacity of the

rechargeable battery power to decrease over time. Replace

the rechargeable battery pack when its capacity becomes

half the usual time, even after charging the battery fully.
Note

• The rechargeable battery pack is not a commercially available

product. To purchase a rechargeable battery pack (NH - 2000 RDP),

consult with your nearest Sony dealer.

Replacing the rechargeable

battery pack

1

Slide the latch to

UNLOCK

, and slide

RELEASE

in

the direction of the arrow on the bottom of this unit.

The battery compartment cover opens, then remove

the cover.

2

Use a coin, etc., to pull out the rechargeable battery

pack.

3

Remove the rechargeable battery pack and disconnect

the lead from the jack inside the battery compartment.

4

Connect the lead of a new rechargeable battery pack

to the jack and insert the battery in the unit.

5

Close the battery compartment cover and slide the

latch to

LOCK

.

1

2

3

4

5

Notes

• Charge a new battery pack before use. See “Preparing a power

source” for details.

• Turn off the unit, before replacing the rechargeable battery pack.

• When replacing the rechargeable battery pack, place a soft cloth,

etc., under the unit.

Preparing the remote

commander

Before using the remote commander for the first time,

remove the insulation film.

To know when to replace the battery

With normal use, the battery (CR2025) should last for

about 6 months. When the remote commander no longer

operates the unit, replace the battery with a new one.

CR2025

Notes

• Do not attempt to charge the battery.

• If you are not going to use the remote commander for a long time,

remove the battery to avoid any damage that may be caused by

leakage and corrosion.

Advertising
This manual is related to the following products: