Samsung SC9908 - Manual (Page 10)

Setting the clock
1. Press the Set button six times, the display will show the hours digit.
2. Press the Mode button until the required hour is displayed.
3. Press the Set button, the display will show the minutes digit.
4. Press the Mode button until the required minute is displayed.
5. Press the Set button to return to the normal clock display.
6. Press the Mode button to start the clock at the selected time. The
colon between the hours and minutes digit will flash showing that the
clock is running.
Note : When setting the hours digit pressing and holding down the mode
button until the hours digit has gone through midnight will change the
clock to 24hr mode, this is indicated by the letter 'H' after the hours
digit. To change back to 12hr mode repeat the procedure. 12hr mode
is indicated by the letter 'A' for AM or 'P' for PM after the hours digit.
A la r m o ff M o d e S e t
A la r m o ff M o d e S e t A la r m o ff M o d e S e t
A la r m o ff M o d e S e t
A la r m o ff M o d e S e t
A la r m o ff M o d e S e t
A la r m o ff M o d e S e t
9
SC9908 Instruction Book.pm6 24/10/99, 14:26 10