Samsung YP-MT6Z - Manual (Page 25)

49
Setting the System Setting the System
48
Š Resume
Press and hold the "M" button. Select Settings ➔ System.
● Use , to select Resume On or Off.
● On: Play back will resume from the point it was
previously stopped.
● Off: Play back will resume from the beginning of the
file/track that was playing when stopped.
Š Default vol
● Use , to set the default volume to a level between
0 and 30.
● If the power is turned on again after having adjusted the
volume to a level above the default volume
(for example: 20) music is played at the default volume level.
● If the power is turned on again after having adjusted the volume at or below the default
volume (for example: 20 or lower), the music is replayed at the previous volume.
Š Tuner Region
● Use , to select FM Tuner Region.
● Worldwide : Search FM frequency between 88.0MHz to
108.00MHz in increments of 50 KHz.
● US : Search FM frequency between 88.0MHz to108.0MHz in
increments of 100 KHz.
● Japan : Search FM frequency between 76.0MHz to 108.0MHz
in increments of 100 KHz.
Š Tuner Level
● Use , to select FM Tuner Sensitivity.
● The higher the FM Tuner Sensitivity,
the more frequency it can receive .
● High → Middle → Low
Š Default Set
● Use , to select Default Set Yes or No.
● Yes : All settings selected will revert back to
the player default settings.
● No : All settings selected will remain as they are.
Š About
● If you select About, you can check the software version
information, total number of tracks and remaining capacity.
N N N N o o o o tt tt e e e e
- Go to samsung.com for software updates.
✍
T6 CAN ENG0.0 1/18/05 13:1412:0 Page 48