Connecting a tv and satellite receiver, 17 connecting a tv and satellite receiver – Sony WEGA KV-27FS210 User Manual
Page 25
Connecting Your TV
17
Connecting a TV and Satellite Receiver
1
Connect the cable from your satellite antenna to SATELLITE IN on your satellite receiver.
2
Connect the coaxial cable from your cable service or antenna to the VHF/UHF jack on
your TV.
3
Using audio/video cables (not supplied), connect AUDIO/VIDEO OUT on your satellite
receiver to AUDIO/VIDEO IN on your TV.
Using your TV with this connection
This connection allows you to do the following:
❏
Program your Sony remote control to operate your satellite receiver (see page 5).
❏
To activate your remote, press
to operate your satellite receiver. See page 7 on how
to operate other functions.
❏
Press
repeatedly to switch to satellite receiver input (VIDEO input).
1
3
4
AUDIO OUT
(VAR/FIX)
VIDEO
L
(MONO)
R
L
R
(MONO)
S VIDEO
Y
P
B
P
R
5
Satellite receiver
Satellite
antenna
cable
1
2
3
From
cable/
antenna
Video (yellow)
Audio R (red)
Audio L (white)
Rear of TV