Samsung HT-P30 - Manual (Page 20)

19
2
Load a disc.
• Depending on the content of the disc, the initial screen may appear different.
1
Press OPEN/
CLOSE button to
open the disc tray.
3
Press OPEN/
CLOSE button to
close the disc tray.
• Place a disc gently into the
tray with the disc’s label
facing up.
Note
To stop playback, press STOP during playback.
•
If pressed once, “ PRESS PLAY ” is displayed and the stop position will be stored in memory.
If PLAY/PAUSE ( ) button or ENTER button is pressed, playback resumes from the stop position.
(This function works only with DVDs.)
• If pressed twice, “ STOP ” is displayed, and if PLAY/PAUSE ( ) button is pressed, playback starts from the
beginning.
To temporarily pause playback, press PLAY/PAUSE during playback.
• To resume playback, press PLAY/PAUSE ( ) button again.
DVD VCD CD
• Playback starts automatically.
Disc Playback
Selecting the Video Format
Press and hold NT/PAL button on the remote controller for over 5 seconds while the power is turned off.
• By default, the video format is set to "PAL".
• " NTSC " or " PAL " will appear in the display.
At this time, press the NT/PAL button shortly to select between " NTSC " and " PAL ".
• Each country has a different video format standard.
• For normal playback, the video format of the disc must be the same as the video format of your TV.