Samsung HT-P30 - Manual (Page 41)

GB
40
SETUP
4
• Enter the old password, a new
password, and confirm new password.
• The setting is complete.
3 5
Press Cursor button to
move to ‘PASSWORD’
and then press
ENTER
button.
Press ENTER
button.
Enter the password
and then press
ENTER button.
2 1
Press MENU button.
Press Cursor
button to move to
‘Setup’ and then
press
ENTER button.
• The password is set to "7890" by default. Note
If you have forgotten the rating level password, do the following:
• While “NO DISC”message appears on the display of main unit, hold the main unit's button for longer than 5
seconds. “INITIALIZE” appears on the display and all settings will return to the default values.
• Press the POWER button.
Using the RESET function will erase all stored settings.
Do not use this unless necessary.
You can set the password for the Parental (rating level) setting.
Setting the Password