Sharp UX-P115 - Manual (Page 40)

Sending a Fax From Memory
38
Memory transmission
You can also send a fax through memory when sending to a single location.
This is convenient when sending to locations where the line is often busy, as it
saves you from waiting to pick up the original document and frees the feeder
for other operations.
6
When you are ready to begin transmission, press .
•
A Transaction Report is automatically printed out after Broadcasting is
completed. Check the "Note" column of the report to see if any of the
locations are marked "Busy" or have a communication error code. If so,
send the document to those locations again.
START/MEMORY
To send a fax through memory, load the document, press , and
then dial using one of the following methods:
♦
Press the number keys to enter the fax number and then press .
♦
Press , enter a 2-digit Speed Dial number, and press .
♦
Press repeatedly to select an auto-dial number and then press .
♦
Press once to select the last number dialed and then press .
START/MEMORY
START/MEMORY
SPEED START/MEMORY
START/MEMORY
START/MEMORY