Operation, Clean air & humidify mode, Clean air mode – Sharp ENGLISHFRANAISESPAOL KC-860U User Manual

Page 14

Advertising
background image

E-12

CLEAN AIR & HUMIDIFY MODE

OPERATION

Use the Clean Air & Humidify Mode to quickly clean the air, reduce odors and to humidify.

1

Fill Water Tank. (See E-11)

Use the Clean Air Mode when additional humidity is not required.

About Automatic Humidify Mode

3

Press the FAN SPEED Button to select the

desired fan speed. (See E-13)

2

Press the CLEAN AIR & HUMIDIFY MODE

Button.

• If the power cord was not unplugged between uses, the

unit will automatically re-start at the previously selected

settings.

The Temperature/Humidity sensors automatically de-

tect and adjust humidity according to changes in room

temperature. Depending on the size and humidity of

the room, humidity may not reach 45 - 55 %. In such

cases, it is recommended that CLEAN AIR & HUMIDI-

FY/MAX MODE be used.

CLEAN AIR MODE

1

Press the CLEAN AIR MODE Button on the display.

• If the power cord was not unplugged between uses, the

unit will automatically re-start at the previously selected

settings.

2

Press the FAN SPEED BUTTON to select the

desired fan speed. (See E-13)

Temperature

Humidity

64 and below

55%

64-75

50%

75 and above

45%

Plasmacluster

ON/OFF Button

Power OFF

Button

Fan Speed

Button

Quick Clean MODE Button

Clean Air & Humidify MODE Button

Clean Air MODE Button

Advertising