Samsung SYNCMASTER 710NT - Manual (Page 16)

1. When starting the system for the first time, the Thin Client Setup Wizard is launched as
shown below. If Next is not clicked during the 15 second countdown after the first 30
seconds, all settings are configured to the factory defaults and the setup wizard is exited.
2. When entering a terminal name and clicking on Network Properties, the Network
Manager dialog box is displayed. This dialog box shows a list of adapters installed on your
terminal. You can change the properties of an adaptor, such as the IP address and name
server, by clicking on Properties.
Click Next to proceed to the next step.