Sony SRS-DB500 - Manual (Page 15)

15 US
B
a
si
c Op
er
a
tio
ns
Changing the display
You can select the illuminator as you
want.
Press DISPLAY on the remote
repeatedly to select the illuminator
you want when the system is
turned on.
Each time you press the button, the
illuminator changes cyclically as follows:
Deco light mode
1)
t Volume mode
2)
t
Power meter mode
3)
t Off
1)
This mode is the default mode. The
illuminator flashes randomly.
2)
The illuminator shows the volume level.
3)
The illuminator lights up base on the input
source level.
Notes
• When you turn JOG +/– (or press
VOLUME +/– on the remote), illuminator
shows the current volume level.
• When you adjust the bass/treble level,
illuminator shows the current bass/treble
level.
Changing the illuminator