Woodstock D4028 User Manual

Instruction sheet, Introduction, Specifications

Advertising
background image

COPYRIGHT © OCTOBER, 2010 BY WOODSTOCK INTERNATIONAL, INC.

WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT

THE WRITTEN APPROVAL OF WOODSTOCK INTERNATIONAL, INC.

Printed in China

#13363TS

Model D4028/D4032

8" & 12" Digital Scale

Instruction Sheet

Phone #: (360) 734-3482 • Online Tech Support: [email protected] • Web: www.shopfox.biz

Introduction

Mount the Model D4028/D4032 on woodworking and

metalworking machinery for precise relative distance

measurements between fixed and moving parts, such as

table height, cutter height, tool depth and more.

Specifications

Maximum Measuring Distance (D4028) ..... 8

1

2

" (216mm)

Maximum Measuring Distance (D4032) ..... 12

3

4

" (324mm

Resolution ............................................... 0.01mm

Maximum Measuring Speed ..................... 1500mm/sec

Battery................... One 1.5V AG13 (LR44) Button Cell

Data Port ................................... 2-Conductor Serial

Identification

Refer to

Figure 1 and the following descriptions to better

understand the components of the digital scale.

A. Upper Mounting Bracket: Secures the scale body to

a fixed machine part with

3

8

" screws (not included).

B. OFF Button: Turns unit OFF.

C. Data Port: Allows a connection to an exterior

device.

D. ON/Zero Button: Turns unit ON and zeros the display

when held.

E. Battery Compartment Cover: Slides to the right for

access to the battery.

F. Display Mounting Bracket: Installs on the back

of the display unit with the two included M3-.5 x

6 Phillips head screws, and mounts to a movable

machine part with

3

8

" fasteners.

G. Lower Mounting Bracket: Works with the upper

mounting bracket to secure the scale body.

H. Scale: Shows the relative distance the display unit

moves in inches (0.10" resolution) and millimeters.

Figure 1. Identification (Model D4028

shown).

A

L

B

C

D

E

F

G

H

I

K

J

I. Decreasing Button: When held,

decreases the displayed number for

precise adjustments.

J. Increasing Button: Increases the dis-

played number when held.

K. Inch/mm Button: Toggles the display

between inches and millimeters.

L. Digital Display: Displays the current

measurement.

Advertising
This manual is related to the following products: