Sony Cyber-shot 4-172-679-12(1) - Manual (Page 100)

Ta
ble
of
co
nte
n
ts
Op
e
rat
io
n
S
ear
ch
MENU/Settin
g
s
Se
ar
ch
In
de
x
100 GB
Viewing an image on a TV
You can view images on a TV by connecting the camera to a TV.
Refer also to the operating instructions supplied with the TV.
1 Turn off both the camera and the TV.
2 Connect the camera to the TV with the cable for multi-use terminal
(supplied).
3 Turn on the TV and set the input.
4 Press (Playback) button to turn on the camera.
Images shot with the camera appear on the TV. Select the desired image with the control
button.
• When using the camera abroad, it may be necessary to switch the video signal output to match that of
your TV system (page 86).
• The shooting image will not be displayed on the TV when the movie is shot under the condition of the
camera and TV connected.
• When output to TV, Easy Viewing mode is invalid.
Viewing images by connecting the camera to a TV
with the supplied cable for multi-use terminal
Notes
1 To audio/video input jacks
Cable for multi-use terminal
(Playback) button
2 To the multi connector