Sony DPP-FP85 - Manual (Page 44)

D:\Printer\DPPFP85.95 series\IM\3285420121DPPFP85.95IM_GB\3285420121\3285420121DPPFP8595IM_GB\050C03.fm
Master: Left
DPP-FP85/FP95 3-285-420-12 (1)
44 GB
• When you are using a television that does not
support the control for HDMI or you connect a
television with the printer for the first time, your
television may not switch input automatically. If
this occurs, switch the input manually to display
the printer pictures on the television.
Procedures for switching the input differ
depending on the type of a television. For details,
see the manual supplied with your television.
• If you remove or connect an HDMI cable while the
printer is performing an image-processing, printing
or other time-consuming job, the display may
switch between LCD and television. Until the job
is competed, however, the display may show
unusual view.
During copying file, deleting file or other file
operations , do not remove or connect an HDMI
cable. Doing so cancels the job.
Using the printer buttons for
printing
1
Insert a memory card into the
printer.
2
Press g/G and ENTER of the printer
to select an image, and then press
PRINT to start printing.
The printing procedures are the same as
those with the printer itself. You can
perform Edit and CreativePrint operations.
Note
During the Edit and CreativePrint operations, the
black lines appear top, bottom, right and left edges of
the screen and the pictures displayed are rough.
Using the television remote
control unit for printing
If your television supports the control for
HDMI, you can use the remote control unit of
your television to operate the printer.
Notes
• We cannot guarantee operations with all types of
televisions.
• When you are using a Sony TV, you cannot use the
TV remote control to operate the printer if the TV
does not support BRAVIA Sync (Sync menu
compatible).
• To operate the printer, the %5$4, [Enter],
[Return] buttons of the remote control support the
HDMI control.
• If the HDMI control setting of your television is
off, you cannot use the TV remote control to
operate the printer. Settings differ depending on
the television you use. For details, see the manual
supplied with your television.
• If “CONTROL FOR HDMI” is set to “Off,” you
cannot use the TV remote control to operate the
printer (page 42).
x Basic printer operations with a TV
remote control unit
• When a cursor is displayed in an index view
or menu display, you can move the cursor by
pressing
%5$4.
• When no cursor is displayed in an image
preview, press $ or a link menu button to
display the operation panel such as the
printer operation panel on the TV monitor.
Press
%5$4 on the TV remote control unit to
select an item and then press [Enter] button.
Printing procedures
Operation panel displayed on the TV monitor