Front/side panel jacks, Using the component shelf – Samsung HCN553W User Manual

Page 10

Advertising
background image

1.3

C

HAPTER

O

NE

: Y

OUR

N

EW

TV

2

Y

O U R

N

E W

T V

ΠPERFECT FOCUS

Press to adjust for the optimum picture set in the Factory.

´ VIDEO INPUT jack

Use to connect a video signal from a camcorder or a video game.

ˇ AUDIO INPUT jacks

Use to connect the audio signals from a camcorder or video game.

¨ S-VIDEO INPUT jack

Use to connect an S-Video signal from a camcorder or a video game.

Front or Side Panel Jacks

You can use the front or side panel jacks to connect an A/V component that is used only
occasionally, such as a camcorder or video game. (For information on connecting
equipment, see pages 2.1 – 2.10.)

Using the Component Shelf

(

HCN473W / HCN553W / HCN653W

)

You can place a VCR, a DVD player, etc. on the Component Shelf.

1

Press the symbol “

in the center of the
Component Shelf door.

2

As shown in figure
below, hold the center
of door and lift it up.

3

After placing a com-
ponent on the shelf,
hold the center of door
and pull it down as
shown in figure below.

4

Shut the door by
pressing the “

symbol.

Note: When placinga component on
the shelf, make sure it is no more
than 5 inches tall and leave one inch
of space from the front and sides for
ventilation.

00054A-02-CHAPTER 1 2004/10/19 12:34 PM Page 3

Advertising