Sony CMT-BX3R - Manual (Page 22)

CMT-BX3R.GB.3-095-505-11(1)
 GB
Using the Timers
The system offers two timer functions.
If you use the Play Timer with the Sleep
Timer, the Sleep Timer has priority.
Sleep Timer:
You can fall asleep to music. This
function works even if the clock is not
set.
Press SLEEP  repeatedly.
If you select “AUTO,” the system
automatically turns off after the current
disc or USB device stops or in 100
minutes.
Play Timer:
You can wake up to CD, tuner or optional
USB device at a preset time.
Use buttons on the remote to control the
Play Timer. Make sure you have set the
clock.
1
Prepare the sound source.
Prepare the sound source, and then
press VOLUME +/  to adjust the
volume.
To start from a specific track or file,
create your own program (page 20).
2
Press CLOCK/TIMER SET  .
3
Press /  repeatedly
to select “PLAY SET,” and then
press ENTER
 .
“ON” appears, and the hour
indication flashes.
4
Set the time to start playing.
Press /  repeatedly to set
the hour, and then press ENTER  .
The minute indication flashes. Use the
procedure above to set the minutes.
5
Use the same procedure as in
step 4 to set the time to stop
playing.
6
Select the sound source.
Press /  repeatedly until
the desired sound source appears, and
then press ENTER

. The display
shows the timer settings.
7
Press /  to turn off the
system.
The system turns on 15 seconds
before the preset time. If the system is
on at the preset time, the Play Timer
will not play.
To activate or check the timer again
Press CLOCK/TIMER SELECT  , press
/  repeatedly until “PLAY
SEL” appears, and then press ENTER  .
To cancel the timer
Repeat the same procedure as above until
“TIMER OFF” appears, and then press
ENTER  .
To change the setting
Start over from step 1.
Tip
The Play Timer setting remains as long as the
setting is not canceled manually.